INSTITUT D’AÉRONAUTIQUE ET DES ETUDES SPATIALES

Publications

Publications 2024

HAMOUDA, Z., AZAIZIA, S., NEHAOUA, M., et al.A miniaturized airplane blade antenna for radio navigation and communication systems. Journal of ElectromagneticWaves and Applications, 2024, vol. 38, no 5, p. 595-610.
DAHMANI, Mourad et FERAHTA, Fatima Zohra. ENHANCING CONVECTIVE HEAT LOSS REDUCTION IN FLAT-PLATE SOLAR COLLECTORS BY OPTIMAL INTEGRATION OF TRANSPARENT PARTITIONS IN THE AIR GAP. Heat Transfer Research, 2024, vol. 55.
BENKHALED, Amar, BENKHEDDA, Amina, BENAOUDA ZOUAOUI, Braham, et al.Fuel consumption estimation for jet aircraft: a mathematical model development. Aircraft Engineering and Aerospace Technology, 2024, vol. 96, no 3, p. 368-377.
YACINE TRAD, Taha, CHOUTRI, Kheireddine, LAGHA, Mohand, et al.Collaborative Multi-Agent Deep Reinforcement Learning Approach for Enhanced Attitude Control in Quadrotors. International Journal of Computing and Digital Systems, 2024, vol. 16, no 1, p. 1-12.
HOCINE, Meskine et MOUFFOK, Lila. Analytical Modeling of a Triple-Band Artificial Magnetic Conductor. AuthoreaPreprints, 2024.
YAHIAOUI, Toufik, HAMAIDIA, Walid, et ZEBBICHE, Toufik. Spars Effect on the Stress Reduction in the Multi-box Airfoils. International Journal of Aeronautical and Space Sciences, 2024, vol. 25, no 1, p. 76-91.

Publications 2023

CHENAOUI, Safia, MOUFFOK, Lila, HEBIB, Sami, et al.Gain stability improvement of a wideband antenna using an artificial magnetic conductor. Microwave and Optical TechnologyLetters, 2023, vol. 65, no 8, p. 2267-2277.

AZZAZEN, Mohamed et BOUKRAA, Salah. Numerical and Experimental Investigation of a Confined Diffusion Flame of Heterogeneous Mixtures. International Journal of Heat&Technology, 2023, vol. 41, no 2.

RAGOUB, Zahra. Active Control of Flutter and LCOs for a Nonlinear Aeroelastic Underactuated Wing. 2023. Thèse de doctorat. University of Blida.

TAHRAOUI, Sofiane, AZMEDROUB, Boussad, CHERCHOUR, Foued, et al.A new methodology for bare soils detection using extended Bragg covariance matrix forms. RemoteSensingLetters, 2023, vol. 14, no 3, p. 288-300.

YOUNES, Abderrahmane, ABADA, Abderahim, BOUAMER, Amirouche, et al.Magnetic properties and Structural characterization of nanocrystalline Fe-20% A (Ni, Co and Si) alloys powders synthesized by mechanical alloying process. ENP Engineering Science Journal, 2023, vol. 3, no 1, p. 3-6.

WALID, HAMAIDIA, TOUFIK, YAHIAOUI, et al.Stagnation Pressure Effect on the Supersonic Two‑Dimensional Plug Nozzle Design. Transactions of Nanjing University of Aeronautics&Astronautics, 2023, vol. 40, no 1.

HASSAINE, Abdellah et MAHI, Amale. Improving photovoltaic technology by nanomaterials: a brief review. Journal of Renewable Energies, 2023, p. 83–92-83–92.

HAMOUDA, Z., AZAIZIA, S., HIDECHE, M., et al.Design and fabrication of an inverted hat antenna paired with a filled cavity for radio-navigation applications. International Journal of Microwave and Wireless Technologies, 2023, vol. 15, no 4, p. 641-648.

RENANE, Rachid, ALLOUCHE, Rachid, et ABDELKADER, Nour. Effects of Preheating Temperature and Fuel-Air Equivalence Ratio on Pollution Control in Hydro Carbon Combustion. Mechanical Engineering Technologies and Applications: Volume 2, 2023, vol. 2, p. 84-104.

BENGHANEM, Yahia, MANSOUL, Ali, et MOUFFOK, Lila. Frequency reconfigurable two-element MIMO antenna for cognitive radio and 5G new radio sub-6 GHz applications. International Journal of Microwave and Wireless Technologies, 2023, p. 1-11.

HAMDA, Nour El Imane, HADJALI, Allel, et LAGHA, Mohand. Multisensor Data Fusion in IoT Environments in Dempster–Shafer Theory Setting: An Improved Evidence Distance-Based Approach. Sensors, 2023, vol. 23, no 11, p. 5141.

HAIF, Sidali, KBAB, Hakim, et BENKHEDDA, Amina. Altitude-compensating axisymmetric supersonic nozzle design and flow analysis. INCAS Bulletin, 2023, vol. 15, no 2, p. 33-47.
ELHIRTSI, Ahmed Abdallahet ZEBBICHE, Toufik. Design and performance evaluation of a high temperature axisymmetric plug nozzle. INCAS Bulletin, 2023, vol. 15, no 3.

BENNOUD, Salim et SARI, Elkhahina. Modeling of eddy currents problem using the shells elements method. In : Mathematics and Information Technologies: Research and Education. 2023. p. 56-56.

HASSAINE, Abdellah et MAHI, Amale. Effects of graphene-platelets reinforcement on the free vibration, bending, and buckling of porous functionally-graded metal-ceramic plates. Journal of Composite Materials, 2023, vol. 57, no 25, p. 3909-3930.

SAADAOUI, Fatima Zohra, CHEGGAGA, Nawal, et DJABRI, Nour El Houda. Multi-sensory system for UAVs detection using Bayesian inference. Applied Intelligence, 2023, vol. 53, no 24, p. 29818-29844.

KBAB, H., ABADA, O., et HAIF, S. Numerical investigation of supersonic flows on innovative nozzles (dual bell nozzle). Journal of AppliedFluidMechanics, 2023, vol. 16, no 4, p. 819-829.

Publications 2022

BELKHELFA, Fatima-Zohra et BOUKRAA, Salah. Damage prediction and test validation of bird impacts on aircraft leading edge’s structures. International journal of crashworthiness, 2022, vol. 27, no 3, p. 717-734

ABADA, Omar, ABADA, Abderahim, KBAB, Hakim, et al. Analysis and Design of Plug Shape of an Aerospike Nozzle. AVIA, 2022, vol. 4, no 1.

FATTOUCHE, Amina, MOUFFOK, Lila, HEBIB, Sami, et al. A triple band artificial magnetic conductor: design & analytical model. Progress In Electromagnetics Research Letters, 2022, vol. 104, p. 161-168.

BOULANOUAR, Khedidja, HADJALI, Allel, et LAGHA, Mohand. Trendssummarizationoftimesseries: amulti-objective genetic algorithm-based model. 2022.

DAHIA, Ahmed, ZIDOUNI, Faiza, BOUALOUACHE, Amine, et al. Numerical Study of Free Liquid Jet Primary Breakup Phenomenon in Still Gases. Algerian Journal of Renewable Energy and Sustainable Development, 2022, vol. 4, no 01, p. 24-37.

BELKALLOUCHE, Abderrahmane, REZOUG, Tahar, DALA, Laurent, et al. Physics informed neural networks for triple deck. Aircraft Engineering and Aerospace Technology, 2022, vol. 94, no 8, p. 1422-1432.

HAIF, Sidali, KBAB, Hakim, et BENKHEDDA, Amina. Design and Numerical Analysis of a Plug Nozzle. Advances in Military Technology, 2022, vol. 17, no 1, p. 17-32.

NAIL, Bachir et BEKHITI, Belkacem. Optimal PID controllers design for discharge pressure-temperature control of centrifugal gas compressor system using Grey Wolf optimizer. Recueil de mécanique, 2022, vol. 6, no 2, p. 629-636.

BOUGHAZI, Nahla, HADDAD, Abdelkrim, et KBAB, Hakim. DESIGN APPROCH AND PERFORMANCE ANALYSIS OF A TRUNCATED IDEAL CONTOUR PROPULSION NOZZLE.

HAKIM, Kbab, TOUFIK, Hamitouche, et MOULOUDJ, Y. Study and simulation of the thrust vectoring in supersonic nozzles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2022, vol. 93, no 1, p. 13-24.

NAIL, Bachir, BEKHITI, Belkacem, et ATOUSSI, Mahedi Abdelghani. Optimal attitude control of a satellite in real orbit using multiple fractional-order controllers. International Journal of Advanced Studies in Computer Science and Engineering, 2022, vol. 11, no 12, p. 17-19.

BELMECHERI, Abdelkrim et DJEBARI, Mustapha. A large signal GaN HEMT transistor based on the angelov model parameters extraction applied to single stage low noise amplifier. Transactions on Electrical and Electronic Materials, 2022, vol. 23, no 6, p. 595-608.

DILMI, Smain. Enhancing flight envelope for a nonlinear aeroelastic wing-section using adaptive fuzzy sliding mode control law. Journal of Aerospace Engineering, 2022, vol. 35, no 3, p. 04022009.

Publications 2021

OTMANE, Fadhéla, TRIAA, Salim, HAMLATI, Zineb, et al.Investigation of the Microwave Absorption Properties of Fe Based Nanocomposites. In :Defect and Diffusion Forum. Trans Tech Publications Ltd, 2021. p. 96-105. https://doi.org/10.4028/www.scientific.net/DDF.407.96

KERROUCHE, Rami, DADOUCHE, Azzedine, MAMOU, Mahmoud, et al. Power loss estimation and thermal analysis of an aero-engine cylindrical roller bearing. Tribology Transactions, 2021, vol. 64, no 6, p. 1079-1094.

CHOUTRI, Kheireddine, LAGHA, Mohand, et DALA, Laurent. A fully autonomous search and rescue system using quadrotor UAV. International Journal of Computing and Digital Systems, 2021, vol. 10, p. 2-12.

BOUDANI, A., BERGHEUL, S., BELKHEIR, S., et al. Improving air navigation at Chlef aerodrome by implementing a new Instrument Landing System (ILS). Journal of Fundamental and Applied Sciences, 2021, vol. 13, no 1, p. 310-322.

YAHIAOUI, Toufik et ZEBBICHE, Toufik. High Temperature Gas Effect on the Supersonic Flow With Application in Nozzles. Journal of Aerospace Sciences and Technologies, 2021, p. 118-128.

BENNIA, Imene, BENABDALLAH, Tawfik, et LOUNIS, Samah. Numerical Study of Heat Transfer in Rectangular Fins for Different Cases of Thermo-Physical Properties. In : Defect and Diffusion Forum. Trans Tech Publications Ltd, 2021. p. 83-98.

MAMAR, Bouziane, SAID, Bergheul, et RACHID, Renane. Prediction of Structural and Magnetic Properties of Nanocrystalline Mechanically Alloyed Fe-Ni Powders Using Multi-Gene Genetic Programming Approach. In : Defect and Diffusion Forum. Trans Tech Publications Ltd, 2021. p. 65-73

EL-KAHINA, Sari et KAMEL, Benachenhou. Stress influence to eddy current control of cracked aeronautical material. Journal of Measurements in Engineering, 2021, vol. 9, no 4, p. 231-240.

YAHIAOUI, Toufik et ZEBBICHE, Toufik. Supersonic several bells design of minimum length nozzle contours for more altitudes level adaptations. Arabian Journal for Science and Engineering, 2021, vol. 46, no 12, p. 11871-11883.

Publications 2020

BOULANOUAR Khedidja, HADJALI Allel, LAGHA Mohand. Data summarization for sensor data management: Towards computational-intelligence-based approaches. International Journal of Computing and Digital Systems, 2020, vol. 9, no 5, p 825–833. http://dx.doi.org/10.12785/ijcds/090505
BOULANOUAR Khedidja, HADJALIAllel, LAGHA Mohand. A hybrid approach for linguistic summarization of time series. International Conference on Data Analytics for Business and Industry: Way Towards a Sustainable Economy (ICDABI), 2020. 10.1109/ICDABI51230.2020.9325701
CHOUTRI Kheireddine, LAGHAMohand, et DALA Laurent. Design of search and rescue system using autonomous Multi-UAVS. Intelligent Decision Technologies, 2020, vol. 14, no 4, p 553–564. https://doi.org/10.3233/IDT-190138
RAGOUB Zahra, LAGHA Mohand, DILMI Smain. Classical and fuzzy sliding mode control for a nonlinear aeroelastic system with unsteady aerodynamic model International Journal of Computing and Digital Systems, 2020, vol. 9, no 6, p 1108–1099. https://dx.doi.org/10.12785/ijcds/090608
KHAMES Walid, HADJALI Allel, LAGHA Mohand. Skyline Computation on Multicore Architectures: A Survey. International Conference on Data Analytics for Business and Industry: Way Towards a Sustainable Economy (ICDABI), 2020. 10.1109/ICDABI51230.2020.9325620
ABADA, Abderahim, BERGHEUL, Said, et YOUNES, Abderrahmane. Mechanical and structural behaviour of TiAlVnanocrystalline elaborated by mechanical milling technique.Micro & Nano Letters, 2020, vol. 15, no 14, p. 1023-1027. https://doi.org/10.1049/mnl.2020.0336
ZAHRA, Ragoub, MOHAND, Lagha, et SMAIN, Dilmi. Classical and fuzzy sliding mode control for a nonlinear aeroelastic system with unsteady aerodynamic model.International Journal of Computing and Digital Systems, 2020, vol. 9, no 6, p. 1108-1099.https://dx.doi.org/10.12785/ijcds/09060
HAKIM, Kbab, TOUFIK, Hamitouche, et SAID, Bergheul. Numerical Simulation of Fluidic Thrust Vectoring in The Conical Nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2020, vol. 73, no 2, p. 88-105. https://doi.org/10.37934/arfmts.73.2.88105
CHOUTRI, Kheireddine, LAGHA, Mohand, et DALA, Laurent. A Fully Autonomous Search and Rescue System Using Quadrotor UAV.International Journal of Computing and Digital Systems, 2020, vol. 10, p. 2-12.
LARBI, Selma H., BOURAHLA, Nouredine, BENCHOUBANE, Hacine, et al. Earthquake Ground Motion Matching on a Small Electric Shaking Table Using a Combined NN-PDFF Controller.Shock and Vibration, 2020, vol. 2020.https://doi.org/10.1155/2020/7260590
ABADA, Omar, ABADA, Abderahim, et EL-HIRTSI, Ahmed Abdallah. Effect of bipropellant combustion products on the rocket nozzle design.Mechanics & Industry, 2020, vol. 21, no 5, 515.https://doi.org/10.1051/meca/2020064
AMRI, Redha. Temperature Effect on the Modal Frequencies of Aluminum Honeycomb Plate.In :Advanced Materials Research. Trans Tech Publications Ltd, 2020. p. 27-41.https://doi.org/10.4028/www.scientific.net/AMR.1159.27
BELKHELFA, Fatima-Zohra et BOUKRAA, Salah. Damage prediction and test validation of bird impacts on aircraft leading edge’s structures. International Journal of Crashworthiness, 2020, p. 1-18. https://doi.org/10.1080/13588265.2020.1838158
ALLOUCHE, Rachid, RENANE, Rachid, et HAOUI, Rabah. Prediction of the optimal speed of an aerospace vehicle by aerothermochemical analysis of hypersonic flow during atmospheric re-entry.Mechanics & Industry, 2020, vol. 21, no 2, p. 208.https://doi.org/10.1051/meca/2020006
HAMLATI, Zineb, OTMANE, Fadhéla, MECHRI, H., et al.Effects of Minor Elements Additions to the NanocrystallineFeAl Alloy Produced by Powder Metallurgy.In :Materials Science Forum. Trans Tech Publications Ltd, 2020. p. 3-9. https://doi.org/10.4028/www.scientific.net/MSF.1005.3
Bouiba, A., El Korso, M. N., Breloy, A., Forster, P., Hamadouche, M., &Lagha, M. (2020). Two-Dimensional Robust Source Localization Under Non-Gaussian Noise. Circuits, Systems, and Signal Processing, 39(9), 4740-4761. https://doi.org/10.1007/s00034-020-01381-2
OTMANE, Fadhéla, HAMLATI, Zineb, REKIOUA, B., et al.X-Band Electromagnetic Characterization of Fe72Al23V5 Based Nanocomposites. In :Defect and Diffusion Forum. Trans Tech Publications Ltd, 2020. p. 146-151. https://doi.org/10.4028/www.scientific.net/DDF.400.146
CHOUICHA, R., SELLAM, Mohammed, et BERGHEUL, Saïd. Effect of Chemical Reactions on the Fluidic Thrust Vectoring of a Plane Nozzle.Arabian Journal for Science and Engineering, 2020, p. 1-14.https://doi.org/10.1007/s13369-020-04350-8
KESBA, Mohamed Khodjet, BENKHEDDA, A., BOUKERT, B., et al. Effect of high temperature on the stiffness properties of cracked composite laminates with different off-axis angles. Procedia Structural Integrity, 2020, vol. 28, p. 864-872. https://doi.org/10.1016/j.prostr.2020.11.055
DRIOUCHE, M., REZOUG, T., et EL-GANAOUI, M. Effect of Droplet Initial Temperature on Substrate Melting and Its Re-solidification in Plasma Spray Process. In :Advances in Materials, Mechanics and Manufacturing. Springer, Cham, 2020. p. 123-132.https://doi.org/10.1007/978-3-030-24247-3_14

Publications 2019

CHOUTRI, Kheireddine, LAGHA, Mohand, et DALA, Laurent. Distributed Obstacles Avoidance For UAVs Formation Using Consensus-based Switching Topology.International Journal of Computing and Digital Systems, 2019, vol. 8, no 2, p. 167-178. http://dx.doi.org/10.12785/ijcds/080208
HAMAIDIA, Walid, ZEBBICHE, Toufik, SELLAM, Mohamed, et al. Performance improvement of supersonic nozzles design using a high-temperature model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2019, p. 0954410019831862. https://doi.org/10.1177/0954410019831862
ABDERRAHMANE, Belkallouche, REZOUG, Tahar, et DALA, Laurent. Passive control of cavity acoustics via the use of surface waviness at subsonic flow.Aircraft Engineering and Aerospace Technology, 2019, vol. 91, no 2, p. 296-308. https://doi.org/10.1108/AEAT-01-2018-0061
Dahia, A., Merrouche, D., Merouani, D.R. et al. Arab J Sci Eng (2019) 44: 5233. https://doi.org/10.1007/s13369-018-3518-2
ZEBBICHE, Toufik. Supersonic Dual Bell Axisymmetric Minimum Length Nozzle Conception for High Propulsion Thrust. International Journal of Aeronautical and Space Sciences, 2019, p. 1-15.https://doi.org/10.1007/s42405-019-00164-7
ZEBBICHE, T. Stagnation pressure effect on the supersonic minimum length nozzle design.The Aeronautical Journal, 2019, vol. 123, no 1265, p. 1013-1031 https://doi.org/10.1017/aer.2019.42
BOUKERT, B., BENKHEDDA, A., ADDA, E. B., et al.Hygrothermal Stresses Analysis of Thick Composite Plates Using High Order Theory Under a Fick Concentration Distribution. Procedia Structural Integrity, 2019, vol. 17, p. 37-43. https://doi.org/10.1016/j.prostr.2019.08.006
Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2019) Multi- Layered Optimal Navigation System For Quadrotors UAV.Aircraft Engineering and Aerospace Technology. ISSN 1748-8842 (In Press) http://nrl.northumbria.ac.uk/40507/

Publications 2018

SIHAM, Dehouche et MHAMED, Hamadouche. Enhanced collective detection for GNSS weak signals acquisition in Rayleigh channel.International Journal of Satellite Communications and Networking, 2018, vol. 36, no 4, p. 332-351. https://doi.org/10.1002/sat.1236
KHALI, El-Hadi et YAO, Yufeng. Large-scale flow structures in turbulence mixing of sonic jet injection into supersonic crossflow. International Journal of Theoretical and Applied Multiscale Mechanics, 2018, vol. 3, no 2, p. 145-160. https://doi.org/10.1504/IJTAMM.2018.096429
ZEBBICHE, Toufik. Rapid design method and new contours for a class of three dimensional supersonic nozzle of arbitrary exit cross section.Mechanics&Industry, 2018, vol. 19, no 4, p. 403. https://doi.org/10.1051/meca/2018003
BENNAMIA, Ismail, BADEREDDINE, A., et ZEBBICHE, T. Measurement of vibrations of composite wings using high-order finite element beam. Journal of Measurements in Engineering, 2018, vol. 6, no 3, p. 143-154. https://doi.org/10.21595/jme.2018.20046
DAHIA, Ahmed, MERROUCHE, Djemai, et REZOUG, Tahar. Radioactive Contamination Control by Atmospheric Dispersion Assessment of Airborne Indicator Contaminants: Numerical Model Validation. Environmental Modeling & Assessment, 2018, vol. 23, no 4, p. 401-414. https://doi.org/10.1007/s10666-018-9598-2
BOUKERT, B., BENKHEDDA, A., ADDA, E. B., et al. Temperature and Humidity Influence Analysis on the Behavior of Thick Composite Plates Using High Order Theory. Procedia Structural Integrity, 2018, vol. 13, p. 174-180. https://doi.org/10.1016/j.prostr.2018.12.029

Publications 2017

KHODJET-KESBA, Mohamed, BENKHEDDA, Amina, REZOUG, Tahar, et al. The influence of hygrothermal effects on the cross-ply composite laminate with transverse cracking in transient mode. Mechanics&Industry, 2017, vol. 18, no 1, p. 102. https://doi.org/10.1051/meca/2016004
MOHAMED, Khodjet-Kesba, AMINA, Benkhedda, BEDIA, Adda, et al. Moisture absorption effect on the stress distribution of the cross-ply laminates with transverse matrix cracks.Procedia Structural Integrity, 2017, vol. 5, p. 271-278. https://doi.org/10.1016/j.prostr.2017.07.131
BENACHENHOU, Kamel, HAMADOUCHE, Mhamed, et TALEB‐AHMED, Abdelmalik. New formulation of GNSS acquisition with CFAR detection.International Journal of Satellite Communications and Networking, 2017, vol. 35, no 3, p. 215-230. https://doi.org/10.1002/sat.1177
BOUN-JAD, Mohamed, ZEBBICHE, Toufik, et ALLALI, Abderrazak. High temperature gas effect on the supersonic axisymmetric Minimum Length Nozzle design.International Journal of Engineering and Technical Research, vol. 7, no 7.
DJILALI, Zidaneet BERGHEUL, S. Study of the Ball Milling Device for Synthesizing Nanocrystalline Powder. In :Journal of Nano Research. Trans Tech Publications, 2017. p. 60-70. https://doi.org/10.4028/www.scientific.net/JNanoR.47.60
HAMLATI, Z., LASLOUNI, W., AZZAZ, Mohammed, et al.Structure and magnetic properties of ternary nanosizedFeAlSn and CuFeCo powders synthesized by mechanical milling.In :Journal of Nano Research. Trans Tech Publications, 2017. p. 79-88. https://doi.org/10.4028/www.scientific.net/JNanoR.47.79

Publications 2016

SALHI, Merouane, ZEBBICHE, Toufik, et MEHALEM, Abderrahmane. Stagnation pressure effect on the supersonic flow parameters with application for air in nozzles.The Aeronautical Journal, 2016, vol. 120, no 1224, p. 313-354. https://doi.org/10.1017/aer.2015.13
BENNOUD, Salim, ZERGOUG, Mourad, et ALLALI, Abderrazak. Numerical simulation for cracks detection using the finite elements method.The International Journal of Multiphysics, 2016, vol. 8, no 1.
DILMI, Smainet BOUZOUIA, Brahim. Improving performance for nonlinear aeroelastic systems via sliding mode controller.Arabian Journal for Science and Engineering, 2016, vol. 41, no 9, p. 3739-3748. https://doi.org/10.1007/s13369-016-2113-7
KIRAD, Abdelkader, ZEBBICHE, Toufik, et BOUN-JAD, Mohamed. Numerical computation of shear stress in a complex cross section subjected to a shear force and application to airfoils. Mechanics & Industry, 2016, vol. 17, no 6, p. 608. https://doi.org/10.1051/meca/2015116
BALAJI, G. Naveen, PRABHA, R., SHANTHINI, E., et al.Rapid low power Synchronous circuits using transmission gates. Advances in Natural and Applied Sciences (Annexure II), 2016, vol. 10, no 17, p. 287-291.

Publications 2015

ABDELKADER, Kirad, TOUFIK, Zebbiche, et MOHAMED, Boun-jad. Torsional stress in non-circular cross sections by the finite element method.Advances in Mechanical Engineering, 2015, vol. 7, no 5, p. 1687814015581979. https://doi.org/10.1177/1687814015581979
SARI, Elkahina et ZERGOUG, Mourad. FEM techniques comparison for SIF computing of cracked Plate. Arabian Journal for Science and Engineering, 2015, vol. 40, no 4, p. 1165- 1171.https://doi.org/10.1007/s13369-015-1567-3
MAHI, Amale, ADDA BEDIA, El Abbas, TOUNSI, Abdelouahed, et al.A new simple shear deformation theory for free vibration analysis of isotropic and FG plates under different boundary conditions.Multidiscipline Modeling in Materials and Structures, 2015, vol. 11, no 3, p. 437-470.https://doi.org/10.1108/MMMS-03-2015-0010

Publications 2014

ABADA, Omar, ZEBBICHE, Toufik, et EL-HIRTSI, Ahmed Abdallah. Three-dimensional supersonic minimum length nozzle design at high temperature for arbitrary exit cross section.Arabian Journal for Science and Engineering, 2014, vol. 39, no 11, p. 8233-8245. https://doi.org/10.1007/s13369-014-1377-z
ALLOUCHE, R., HAOUI, R., et RENANE, R. Numerical simulation of reactive flow in non- equilibrium behind a strong shock wave during re-entry into earth’s atmosphere. Mechanics & Industry, 2014, vol. 15, no 1, p. 81-87.https://doi.org/10.1051/meca/2014002
ZEBBICHE, Toufik, BOUN-JAD, Mohamed, et ALLALI, Abderrazak. Geometric characteristics of thin wall sections with application to airfoils.Arabian Journal for Science and Engineering, 2014, vol. 39, no 8, p. 5917-5927. https://doi.org/10.1007/s13369-014-1152-1
TOUFIK, Zebbiche, MOHAMED, Boun-jad, et ABDERRAZAK, Allali. Structural characteristics of simply connected planar sections with application to airfoils.Journal of Materials and Engineering Structures «JMES», 2014, vol. 1, no 2, p. 89-98.
TOUFIK, Zebbiche, MOHAMED, Boun-jad, et ABDERRAZAK, Allali. Stress in closed thin-walled tubes of single box subjected by shear forces and application to airfoils. Journal of Materials and Engineering Structures «JMES», 2014, vol. 1, no 2, p. 73-88.

Publications 2013

LAGHA, M., TIKHEMIRINE, M., BERGHEUL, S., et al.De-noised estimation of the weather Doppler spectrum by the wavelet method.Digital Signal Processing, 2013, vol. 23, no 1, p. 322-328.https://doi.org/10.1016/j.dsp.2012.08.001
TIKHEMIRINE, M., LAGHA, M., et BERGHEUL, S. Noise cancellation in Doppler moment estimation of array weather radar signals using lifted biorthogonal wavelets. Digital Signal Processing, 2013, vol. 23, no 3, p. 744-750.https://doi.org/10.1016/j.dsp.2013.01.007

Publications 2012

HAMLATI, Z., GUITTOUM, A., BERGHEUL, S., et al.X-ray diffraction, microstructure, and Mössbauer studies of Fe 72 Al 28 alloy elaborated by mechanical milling.Journal of materials engineering and performance, 2012, vol. 21, no 9, p. 1943-1948. https://doi.org/10.1007/s11665-011-0095-x
ZEBBICHE, Toufik, SALHI, Merouane, et BOUN-DJAD, Mohamed. Numerical computation of supersonic flow around a pointed airfoils. Journal of Computational Methods in Sciences and Engineering, 2012, vol. 12, no 3, p. 213-233. http://dx.doi.org/10.3233/JCM-2012-0398

Publications 2011

ZIDANE, D., BERGHEUL, S., REZOUG, T., et al.Study of the Temperature Variations of Al and Ti in Mechanical Alloying.Journal of materials engineering and performance, 2011, vol. 20, no 7, p. 1109-1113.https://doi.org/10.1007/s11665-010-9721-2
BENNOUD, Salim et MOURAD, Zergoug. The non destructive testing methods applied to detect cracks in the hot section of a turbojet. In :Applied Mechanics and Materials. Trans Tech Publications, 2011. p. 79-83. https://doi.org/10.4028/www.scientific.net/AMM.61.79
ALLOUCHE, R., HAOUI, R., PARISSE, J. D., et al.Study of Thermo-Chemical Non- Equilibrium Phenomena behind Strong Shock Waves at Atmospheric Reentry.In :Advanced Materials Research. Trans Tech Publications, 2011. p. 13-22. https://doi.org/10.4028/www.scientific.net/AMR.274.13
HAMLATI, Zineb, GUITTOUM, A., BERGHEUL, S., et al.Effect of the Milling Conditions on the Formation of Nanostructured Fe–Al Powders.In :Advanced Materials Research. Trans Tech Publications, 2011. p.490-497. https://doi.org/10.4028/www.scientific.net/AMR.214.490
RENANE, R., SERRO-GUILLAUME, Olivier, NOUR, A., et al.Simulation and analysis of the structure of laminar premixed flame.In :Advanced Materials Research. Trans Tech Publications, 2011. p. 23-32. https://doi.org/10.4028/www.scientific.net/AMR.274.23
MAHI, A., ADDA-BEDIA, E. A., et BENKHEDDA, A. An analytical method for free vibration analysis of composite beams subjected to initial thermal stresses. In :Key Engineering Materials. Trans Tech Publications, 2011. p. 1-9. https://doi.org/10.4028/www.scientific.net/KEM.482.1
AMRI, R. et REZOUG, T. Numerical study of liquid propellants combustion for space applications. ActaAstronautica, 2011, vol. 69, no 7-8, p. 485-498. https://doi.org/10.1016/j.actaastro.2011.05.008
ZEBBICHE, Toufik et HAMDI, Nasreddine. Delaunay triangulation by a technical insertion point applied for complexes geometries. Journal of Computational Methods in Sciences and Engineering, 2011, vol. 11, no 3, p. 143-158. http://dx.doi.org/10.3233/JCM-2011-0372
REZOUG, Tahar, BENKHEDDA, Amina, KHODJET-KESBA, Mohamed, et al.Analyse des plaques composites fissurées et vieillies en conditions hygrothermiques. Mécanique & Industries, 2011, vol. 12, no 5, p. 395-398.https://doi.org/10.1051/meca/2011134

Publications 2010

LAGHA, Mohand, TIKHEMIRINE, Mohamed, BERGHEUL, Said, et al. Performances comparison of pulse pair and wavelets methods for the pulse Doppler weather radar spectrum. In :Wavelet Applications in Industrial Processing VII. International Society for Optics and Photonics, 2010.p. 753504.https://doi.org/10.1117/12.838719
HADDAD, Ahmed, ZERGOUG, Mourad, AZZAZ, Mohamed, et al.Monitoring of metal powder by eddy current. International Journal of Microstructure and Materials Properties, 2010, vol. 5, no 1, p. 3-14. http://dx.doi.org/10.1504/IJMMP.2010.032497
ZEBBICHE, Toufik. Numerical quadrature for the Prandtl Meyer function at high temperature with application for air. Journal of Computational Methods in Sciences and Engineering, 2010, vol. 10, no 1, 2, p. 13-22. http://dx.doi.org/10.3233/JCM-2010-0284

Publications 2009

LAGHA, Mohand et BENSEBTI, Messaoud. Doppler spectrum estimation by Ramanujan- Fourier transform (RFT). Digital Signal Processing, 2009, vol. 19, no 5, p. 843-851. https://doi.org/10.1016/j.dsp.2009.03.007
Zebbiche, T. (2009).Effect of the stagnation temperature on the normal shock wave.Journal of Computational Methods in Sciences and Engineering, 9(1-2), 79-92. http://dx.doi.org/10.3233/JCM-2009-0253

Publications 2008

BENKHEDDA, A., TOUNSI, A., et al.Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates. Composite Structures, 2008, vol. 82, no 4, p. 629-635. https://doi.org/10.1016/j.compstruct.2007.04.013
AISSANI, M., BASSIR, D. H., et BENKEDDA, Y. Thermal Simulation and Experimental Characterizations of Aeronautic Stainless Steel Welded by TIG process. International Review of Aerospace Engineering (I. RE.AS. E), 2008, vol. 1, no 5, p. 481-488.
ZEBBICHE, Toufik. Supersonic axisymmetric minimum length nozzle conception at high temperature with application for air.International Journal of Aeronautical and Space Sciences, 2008, vol. 9, no 1, p. 1-30. https://doi.org/10.5139/IJASS.2008.9.1.001
MEKARZIA, M. et GUERTI, M. Measurement and Identification of Acoustic Impulse Response. Building Acoustics, 2008, vol. 15, no 1, p. 73- 78.https://doi.org/10.1260%2F135101008784050197
ZEBBICHE, Toufik. Numerical Quadrature for the Prandtl Meyer Function at High Temperature with Application for Air.International Journal of Aeronautical and Space Sciences, 2008, vol. 9, no 2, p. 9-17.https://doi.org/10.5139/IJASS.2008.9.2.009
OTMANE, Fadhela, BERGHEUL, S., HAMLATI, Z., et al.How Fe60Co40 and Fe72Al28nano-alloys produced by mechanical alloying behave when exposed to microwaves. In:Materials Science Forum. Trans Tech Publications, 2008. p. 977-981. https://doi.org/10.4028/www.scientific.net/MSF.584-586.977
LAGHA, Mohand et BENSEBTI, Messaoud. Performances comparison of pulse-pair and 2- step prediction algorithms for the doppler spectrum estimation. Multidimensional Systems and Signal Processing, 2008, vol. 19, no 2, p. 257-265.https://doi.org/10.1007/s11045-007-0030-3

CONFERENCES

CONFÉRENCES 2024

MILOUA, Miloua, MESKINE, Meskine, BILEL, Mebarek, et al.A Uav-Based Close Monitoring of The Vegetation for Precision Agriculture Purposes. In : 2024 IEEE Mediterranean and Middle-East Geoscience and Remote Sensing Symposium (M2GARSS). IEEE, 2024. p. 205-209.

CONFÉRENCES 2023

CHENAOUI, Safia, MOUFFOK, Lila, et HEBIB, Sami. Investigation of an octagonal AMC reflector backed wideband antenna for gain stabilization. In : 2023 International Conference on Advances in Electronics, Control and Communication Systems (ICAECCS). IEEE, 2023. p. 1-5.
LEBSIR, Abdelkadir et BENAMIMOUR, Tariq. Renewable energies in the twenty-first century: A global-view. In : 2023 Second International Conference on Energy Transition and Security (ICETS). IEEE, 2023. p. 1-6.
HAMOUDA, Z., AZAIZIA, S., BOUZIANE, A., et al.Development of a Miniaturized Broadband Blade Antenna for Aeronautical Applications. In : 2023 17th European Conference on Antennas and Propagation (EuCAP). IEEE, 2023. p. 1-5.
YAHIAOUI, Toufik et ZEBBICHE, Toufik. Strain energy form coefficients for bending of short beams having full and thin-walled arbitrary cross section with application for FEM and Airfoils. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2023, vol. 237, no 3, p. 614-644.
DEHOUCHE, Siham et HAMMADOUCHE, Mhamed. Side peak cancellation by adaptive non coherent acquisition for the Galileo E1 signal. In : 2023 20th International Multi-Conference on Systems, Signals & Devices (SSD). IEEE, 2023. p. 756-762.
ELKAHINA, Sari, KAMEL, Benachenhou, SALIM, Bennoud, et al.Residual Stresses Characterization in Friction Stir Welding of 2017 A-T451 Alloy Using Eddy Current Control. In : International Conference on Metal Material Processes and Manufacturing. Singapore : Springer Nature Singapore, 2023. p. 132-143.
BENGHANEM, Yahia, MANSOUL, Ali, et MOUFFOK, Lila. Compact Super Wideband Two-element MIMO Antenna for 5G Millimeter-Wave Applications. In : 2023 International Conference on Advances in Electronics, Control and Communication Systems (ICAECCS). IEEE, 2023. p. 1-5.

CONFÉRENCES 2022

HAMDA, Nour El Imane, HADJALI, Allel, et LAGHA, Mohand. An advanced weighted evidence combination method for multisensor data fusion in IoT. In : 2022 international conference on decision aid sciences and applications (dasa). IEEE, 2022. p. 810-815.
BOUMAAZA, Kawter, HEBIB, Sami, et MOUFFOK, Lila. Compact two-port tapered microstrip feed MIMO antenna for UWB applications. In : 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE, 2022. p. 1-4.
FATTOUCHE, Amina, MOUFFOK, Lila, et HEBIB, Sami. Design of quad-band dipole over a quad-band Artificial Magnetic Conductor. In : 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE, 2022. p. 1-4.
YAHIA, Benghanem, ALI, Mansoul, et LILA, Mouffok. Compact Tri-Band Two-Element MIMO Slot Antenna for 5G Sub-6 GHz Frequency Bands. In : 2022 2nd International Conference on Advanced Electrical Engineering (ICAEE). IEEE, 2022. p. 1-6.
RAGOUB, Zahra, LAGHA, Mohand, et DILMI, Smain. Observer-Based Fuzzy Sliding Mode Control for Nonlinear Aeroelastic Models via Unsteady Aerodynamics. In : Proceedings of International Conference on Industrial Instrumentation and Control: ICI2C 2021. Singapore : Springer Nature Singapore, 2022. p. 277-286.